Batting,Runs,Extra,over

Batting
======

Main articles: batsman and batting (cricket)
====================================

At any one time, there are two batsmen in the playing area. One takes station at the striker's end to defend the wicket as above and to score runs if possible. His partner, the non-striker, is at the end where the bowler is operating. The legendary W G Grace taking guard in 1883. He was the world's greatest batsman in the 19th century.The legendary W G Grace taking guard in 1883. He was the world's greatest batsman in the 19th century.Batsmen come in to bat in a batting order, decided by the team captain. The first two batsmen - the "openers" - usually face the most hostile bowling, from fresh fast bowlers with a new ball. The top batting positions are usually given to the most competent batsmen in the team, and the non-batsmen typically bat last. The pre-announced batting order is not mandatory and when a wicket falls any player who has not yet batted may be sent in next.

If a batsman "retires" (usually due to injury) and cannot return, he is actually "not out" and his retirement does not count as a dismissal, though in effect he has been dismissed because his innings is over. Substitute batsmen are not allowed, although substitute fielders are.

A skilled batsman can use a wide array of "shots" or "strokes" in both defensive and attacking mode. The idea is to hit the ball to best effect with the flat surface of the bat's blade. If the ball touches the side of the bat it is called an "edge". Batsmen do not always seek to hit the ball as hard as possible and a good player can score runs just by making a deft stroke with a turn of the wrists or by simply "blocking" the ball but directing it away from fielders so that he has time to take a run.

Cricket is very fond of naming things, as with the field placings, and each shot or stroke in the batsman's repertoire has a name according to the style of swing and the direction aimed: e.g., "cut", "drive", "hook", "pull", etc.

Note that a batsman does not have to play a shot and can "leave" the ball to go through to the wicketkeeper, providing he thinks it will not hit his wicket. Equally, he does not have to attempt a run when he hits the ball with his bat. He can deliberately use his leg to block the ball and thereby "pad it away" but this is risky because of the lbw rule.

In the event of an injured batsman being fit to bat but not to run, the umpires and the fielding captain may allow another member of the batting side to be a runner. If possible, the runner must already have batted. The runner's only task is to run between the wickets instead of the injured batsman. The runner is required to wear and carry exactly the same equipment as the incapacitated batsman. It is possible for both batsmen to have runners.
=====================================================================

Runs

====

The directions in which a right-handed batsman intends to send the ball when playing various cricketing shots. The diagram for a left-handed batsman is a mirror image of this one.
The directions in which a right-handed batsman intends to send the ball when playing various cricketing shots. The diagram for a left-handed batsman is a mirror image of this one.

The primary concern of the batsman on strike (i.e., the "striker") is to prevent the ball hitting the wicket and secondarily to score runs by hitting the ball with his bat so that he and his partner have time to run from one end of the pitch to the other before the fielding side can return the ball. To register a run, both runners must touch the ground behind the crease with either their bats or their bodies (the batsmen carry their bats as they run). Each completed run increments the score.

More than one run can be scored from a single hit but, while hits worth one to three runs are common, the size of the field is such that it is usually difficult to run four or more. To compensate for this, hits that reach the boundary of the field are automatically awarded four runs if the ball touches the ground en route to the boundary or six runs if the ball clears the boundary on the full. The batsmen do not need to run if the ball reaches or crosses the boundary.

Hits for five are unusual and generally rely on the help of "overthrows" by a fielder returning the ball. If an odd number of runs is scored by the striker, the two batsmen have changed ends and the one who was non-striker is now the striker. Only the striker can score individual runs but all runs are added to the team's total.

The decision to attempt a run is ideally made by the batsman who has the better view of the ball's progress and this is communicated by calling: "yes", "no" and "wait" are often heard.

Running is a calculated risk because if a fielder breaks the wicket with the ball while no part of the batsman or his bat is grounded behind the popping crease, the batsman nearest the broken wicket is run out.

A team's score is reported in terms of the number of runs scored and the number of batsmen that have been dismissed. For example, if five batsmen are out and the team has scored 224 runs, they are said to have scored 224 for the loss of 5 wickets (commonly shortened to "224 for five" and written 224/5 or, in Australia, "five for 224" and 5/224).
====================================================================

Extras

=====

Additional runs can be gained by the batting team as extras (called "sundries" in Australia) by courtesy of the fielding side. This is achieved in four ways:

1. No ball – a penalty of one extra that is conceded by the bowler if he breaks the rules of bowling either by (a) using an inappropriate arm action; (b) overstepping the popping crease; (c) having a foot outside the return crease
2. Wide – a penalty of one extra that is conceded by the bowler if he bowls so that the ball is out of the batsman's reach
3. Bye – extra(s) awarded if the batsman misses the ball and it goes past the wicketkeeper to give the batsmen time to run in the conventional way (note that the mark of a good wicketkeeper is one who restricts the tally of byes to a minimum)
4. Leg bye – extra(s) awarded if the ball hits the batsman's body, but not his bat, and it goes away from the fielders to give the batsmen time to run in the conventional way.

When the bowler has bowled a no ball or a wide, his team incurs an additional penalty because that ball (i.e., delivery) has to be bowled again and hence the batting side has the opportunity to score more runs from this extra ball.

The batsmen have to run (i.e., unless the ball goes to the boundary for four) to claim byes and leg byes but these only count towards the team total, not to the striker's individual total for which runs must be scored off the bat.
=====================================================================

Dismissals

========

Main article: Dismissal (cricket)

There are ten ways in which a batsman can be dismissed and some are so unusual that only a few instances of them exist in the whole history of the game. The most common forms of dismissal are "bowled", "caught", "leg before wicket" (lbw), "run out", "stumped" and "hit wicket". The unusual methods are "hit the ball twice", "obstructed the field", "handled the ball" and "timed out".

Before the umpire will award a dismissal and declare the batsman to be out, a member of the fielding side (generally the bowler) must "appeal". This is invariably done by asking (or shouting) the term "Owzat?" which means, simply enough, "How is that?" If the umpire agrees with the appeal, he will raise a forefinger and say "Out!". Otherwise he will shake his head and say "Not out". Appeals are particularly loud when the circumstances of the claimed dismissal are unclear, as is always the case with lbw and often with run outs and stumpings.

1. Bowled – the bowler has hit the wicket with the ball and the wicket has "broken" with at least one bail being dislodged (note that if the ball hits the wicket without dislodging a bail it is not out) [8]
2. Caught – the batsman has hit the ball with his bat or with his hand and the ball has been caught on the full by a member of the fielding side [9]
3. Leg before wicket (lbw) – is complex but basically means that the batsman would have been bowled if the ball had not hit his leg first [10]
4. Run out – a member of the fielding side has broken or "put down" the wicket with the ball while a batsman was out of his ground; this usually occurs by means of an accurate throw to the wicket while the batsmen are attempting a run [11]
5. Stumped – is similar except that it is done by the wicketkeeper after the batsman has missed the bowled ball and has stepped out of his ground; the keeper must break the wicket with the ball in his hand for a stumping (if the keeper throws the ball at the wicket, it is a run out) [12]
6. Hit wicket – means simply that a batsman did just that, often by hitting the wicket with his bat or by falling onto it or running into it [13]
7. Hit the ball twice – is very unusual and was introduced as a safety measure to counter dangerous play and protect the fielders, although when it does occur it is usually because the batsman has tried to stop the ball hitting the wicket after he has already played it [14]
8. Obstructed the field – another unusual dismissal which tends to involve a batsman deliberately getting in the way of a fielder [15]
9. Handled the ball – a batsman must not deliberately use his hand to protect his wicket (note that the bowled ball often hits the batsman's hand but this is not intentional by the batsman and so is not out; though he can of course be caught off his hand) [16]
10. Timed out – usually means that the next batsman did not arrive at the wicket within two minutes of the previous one being dismissed [17]

Note that it is usually the striker who is out when a dismissal occurs but the non-striker can be dismissed, invariably by being run out.

A batsman may leave the field without being dismissed. If injured or taken ill the batsman may temporarily retire, and be replaced by the next batsman. This is recorded as retired hurt or retired ill. The retiring batsman is not out, and may resume the innings later. An unimpaired batsman may retire, and this is treated as being dismissed retired out; no player is credited with the dismissal.

Batsmen cannot be out bowled, caught, leg before wicket, stumped or hit wicket off a no ball. They cannot be out bowled, caught, leg before wicket, or hit the ball twice off a wide.

Some of these modes of dismissal can occur without the bowler bowling a delivery. The batsman who is not on strike may be run out by the bowler if he leaves his crease before the bowler bowls, and a batsman can be out obstructing the field or retired out at any time. Timed out is, by its nature, a dismissal without a delivery. With all other modes of dismissal, only one batsman can be dismissed per ball bowled.
=====================================================================